Skyrc RS16 180W/16A Balance Charger/Discharger User Manual download pdf (Page 16)

LITHIUM BATTERY METER

PROGRAM SELECT

Li BATT METER

Move the joystick right to enter the Lithium

Battery Meter program.

4.19 4.15 4.18V

0.00 0.00 0.00V

The screen indicate each cell's voltage.

MAIN 12.52V

H4.190V L4.160V

The screen indicate the total voltage, the highest

voltage, the lowest voltage.

The user can check battery's total voltage, the highest voltage, the

lowest voltage and each cell's voltage.

Please connect the battery to the charger main battery lead to battery

socket and balance wires to balance socket.

This diagram shows the correct way to connect your battery to

check the voltage.

RIGHT

SYSTEM SET UP

It will be operated with the default value of the essential user settings

when it is connected to a DC 11~18V battery for the first time. The

screen displays the following information in sequence and the user can

change the value of parameter on each screen.

When you are willing to alter the parameter value, move the joystick

right to make it blink then change the value by moving the joystick

up/down. The value will be stored by re-moving the joystick right.

PROGRAM SELECT

SYSTEM SET

Rest Time

CHG＞DCHG 10Min

SAFETY TIME

ON 120Min

User set up starting screen.

The battery is on the cyclic process of charge

and discharge can often become warm after

charge or discharge period. The program can

insert a time delay to occur after each charge

and discharge process to allow the battery

adequate time to cool down before being

subjected to the next process. The value

ranges from 1 to 60 minutes.

When you start a charge process, the integral

safety timer automatically starts running at the

same time. This is programmed to prevent

overcharge the battery if it proves to be faulty,

or if the termination circuit cannot detect the

battery full. The value for the safety timer

should be generous enough to allow a full

charge of the battery.

Safe timer Calculation

When charging NiMH or NiCad batteries,

divide the capacity by current, then divide the

UP DOWN

DC INPUT

11-18V

Lithium

Battery

Power Supply

DC INPUT

11-18V

Bottom

Right Side

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Skyrc RS16 180W/16A Balance Charger/Discharger User Manual Page 16

Comments to this Manuals

Related products and manuals for Power suppliers Skyrc RS16 180W/16A Balance Charger/Discharger