Skyrc RS16 180W/16A Balance Charger/Discharger User Manual download pdf (Page 10)

These programs are only suitable for charging and discharging lithium

batteries with a nominal voltage of 3.7V, 3.6V and 3.3V per cell. These

batteries need to adopt different charge technique which is termed as

constant voltage(CV) and constant current(CC) method. The charge

current varies according to the battery capacity and performance. The

final voltage of charge process is also very important; it should be

precisely matched with the charge voltage of the battery. They are 4.2V

for LiPo, 3.6 V for LiFe, and 4.1V for Lilon. The charge current and

nominal voltage as for cell count set on the charge program must

always be correct for the battery to be charged.

CHARGING LITHIUM BATTERY AT BALANCE MODE

This function is for balancing the voltage of lithium-polymer battery

cells while charging.

In the balance mode, the battery needs to connect to the battery's

power lead with balance wire.

In this mode, the charging process will be different from ordinary

charging mode. The internal processor of the charger will monitor the

voltages of each cell of the battery pack and control charging current

which is feeding to each cell to equalize the voltage.

Note: We recommend charging lithium batteries with a balance wire in

the balance mode only.

> 3 seconds

The left side of the first line shows the type

of battery you choose. The value on the left

of the second line of the charger is current

the user sets. After setting the current and

voltage, move the joystick right and hold it

for 3 seconds to start the process.

UP DOWN

Number

cells

Battery

voltage

Charging

time

Charged

capacity

Charging

current

This screen shows the real-time status during

charge process. Move the joystick left to stop

the charge process.

This screen displays the number of cells you

set up and the processor detects. R shows

the number of cells detected by the charger

and S is the number of cells set by you at

the previous screen. If both numbers are

identical you can start charging process. If

not, move the joystick left to go back to

previous screen to recheck the number of

cells of the battery pack before going ahead.

CHARGING OF LITHIUM BATTERY

This charging mode is for charging LiPo/LiFe/LiIon battery in normal

mode.

Note: We recommend charging lithium batteries with a balance lead in

the balance mode only.

The left side of the first line shows the type

of battery you choose. The value on the left

of the second line of the charger is current

the user sets. After setting the current and

voltage, move the joystick right and hold it

for 3 seconds to start the process.

This displays the number of cells you set up

and the processor detects. R shows the

number of cells detected by the charger and

LEFT RIGHT

RIGHT

> 3 seconds

UP DOWN

LEFT RIGHT

LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Skyrc RS16 180W/16A Balance Charger/Discharger User Manual Page 10

Comments to this Manuals

Related products and manuals for Power suppliers Skyrc RS16 180W/16A Balance Charger/Discharger