Skyrc Quattro Micro Battery Charger User Manual download pdf (Page 3)

When the charging process is finished, the status LED turn green and blinks 5 times with audible

sound. And the status LED stays green and the 4-digital LED will display “FULL”.

Insert the battery lead to the right battery connector.

Note: Please make sure insert the battery polarities correctly.

Select the charging current (0.1-1A) by rotating the dial.

Press and hold START/STOP button for 3 seconds to start charging process. The related status

LED will turn red with long beep.

During the charging process, the 4 digital LED will display charging capacity, battery voltage and

charging current circularly.

The LED will stay red during the whole charging process.

Press and hold START/STOP button for 3 seconds during charging process to stop charging.

OPERATING

4 DIGITAL LED MESSAGE DISPLAY

Status: Charging process finish.

Charging Current(A)

(0.10-1.00A)

Charging Capacity(mAh)

Note: You are not able to adjust the charging current during charging process.

Charging Capacity(mAh) Battery Voltage(V) Charging Current(A)

At this time, if you press the “START/STOP” button once, the 4-digital LED will display “FULL”, battery voltage

and battery capacity circularly.

Note:

Battery Voltage(V)

Battery Voltage(V) Charging Capacity(mAh)

1 2 3 4

No comments

Skyrc Quattro Micro Battery Charger User Manual Page 3